Master your CHUZHAO M3 in minutes
A clean, no-fluff walkthrough of the M3 — setup, every button, photo & video, filters, file transfer and troubleshooting. Start shooting in minutes, no app or account required.
32 GB Card Included
12 MP · 1080P FHD
Type-C
Everything you need, in one pocket camera
A quick look at what the CHUZHAO M3 brings to every shoot.
12 MP Photos
Crisp, vivid stills straight out of the camera.
Imaging1080P FHD Video
Smooth Full HD clips with built-in mic.
Video2.8″ HD Display
Bright and clear for easy framing.
ScreenAutofocus
Sharp from 10 cm to infinity.
Focus8 Built-in Filters
Instant creative looks at a tap.
Creative3 / 5 / 10 s Timer
Hands-free group shots and selfies.
Timer1000 mAh Battery
≈ 120 min of shooting per charge.
PowerType-C Transfer & Charge
One cable, two jobs — fast and tidy.
ConnectivityEvery button, mapped
Every control on the M3 and exactly what it does — straight from the manual.
Get the most out of your M3
Follow each section in order on first use, then jump back any time you need a refresher.
First-Time Setup
Start hereThree quick steps to get your M3 ready to shoot — no app, no account, no fuss.
-
1
Insert the 32 GB TF card
Open the memory-card slot on the side of the camera and slide the included 32 GB TF card in with the gold contacts facing down. Push gently until it clicks into place.
Always power off the camera before inserting or removing a card. -
2
Charge the battery
Plug the included Type-C cable into the camera’s charging port and connect to a USB power source (computer, power bank, or 5 V / 1 A wall adapter). The status light shows charging; the camera is fully charged in about 3 hours.
-
3
Power on
Press and hold the Power button for 3–5 seconds until the screen lights up. You’ll see the live preview — you’re ready to shoot.
To power off, hold the Power button for 3 seconds.
Taking Photos
The default mode when you power on. Point, frame, shoot.
-
1
Confirm Photo mode
Make sure the camera icon (not the video camera icon) is shown in the corner of the screen. If you’re in Video mode, short-press the Up button to switch back to Photo mode.
-
2
Frame your shot
Use the 2.8″ display to compose the shot. Hold the camera steady about 30–60 cm from your subject for portraits.
-
3
Press the shutter to shoot
The autofocus locks on as you press the shutter. Press fully to capture the photo — it’s saved automatically as a 12 MP JPG.
Tip: For close-ups, move in until your subject is 10 cm from the lens — that’s the minimum focus distance.
Recording Video
Capture smooth Full HD clips with sound, straight from the camera.
-
1
Switch to Video mode
From the shooting screen, short-press the Up button — the video camera icon appears and the camera enters Video mode. Short-press Up again to return to Photo mode.
-
2
Start recording
Press the Shutter button once. A red dot and elapsed timer appear on screen — recording has begun.
-
3
Stop recording
Press the Shutter button again. The clip is saved as a 1080P MOV file to the memory card.
Audio is recorded via the built-in microphone — keep the camera within a reasonable distance for the best sound.
Filters & Shutter Delay
Two creative tools to make every shot look the way you want.
-
F
Apply a filter
In Photo or Video mode, rotate the Filter Dial left or right to cycle through the 8 built-in filters (Vintage, Vivid, etc.). The filter previews live on screen and applies instantly — no need to press OK. The selected filter stays active until you change it.
-
T
Use the shutter delay
Press the Timer button to cycle through Off → 3 s → 5 s → 10 s. Once armed, the next shutter press triggers a countdown before the photo is taken — perfect for selfies, group shots and tripod photos.
Settings Menu
Adjust quality, language, auto-power-off and more. Press the Setting button to open the menu, then use Up / Down to navigate and OK to confirm.
Using the Fill Light
Brighten faces and add a flattering catchlight in dim environments.
-
1
Mount the fill light
Align the fill light’s clip with the side of the camera body and slide it on until it locks in place.
-
2
Power it on
Press the switch on top of the fill light once to turn it on. Press it again to cycle through the 3 brightness levels. Adjust the position so the light points toward your subject. The fill light is rechargeable — its Type-C charging port is on the back of the fill light body.
-
3
Shoot as normal
Compose your shot and press the shutter. Switch the fill light off when you’re done to save battery.
Transferring Files & Charging
One Type-C cable does it all — move photos and videos to your computer, and charge the camera at the same time.
-
1
Connect the Type-C cable
Plug the included Type-C cable into the camera’s charging port and connect the other end to your computer (or a USB wall adapter for charging only).
-
2
Transfer files
Power on the camera. It will appear on your computer as a removable drive — open it, then drag and drop photos and videos to your computer. No software required.
macOS users: the drive mounts automatically. Windows users: open “This PC” and look for the new drive. -
3
Charge safely
Use a 5 V / 1 A USB source (computer, power bank, or wall adapter). The camera charges in roughly 3 hours. Disconnect once the status indicator shows full.
Everything you need to start shooting
Open the box and you’re ready to go.
CHUZHAO M3 Camera
Camera body with built-in battery and screen.
32 GB TF Card
Pre-installed in the camera — start shooting straight away.
Type-C Cable
For charging and transferring files to a computer.
Wrist Strap
Keep the camera secure on the go.
User Manual
Printed quick-start guide with safety information.
Technical details
Everything you need to know about the CHUZHAO M3 at a glance.
Imaging & Capture
Power & Charging
Storage & Interface
Build & Audio
Stay safe. Solve common issues.
Quick safety notes from the user manual, plus fixes for the most common problems.
Safety Notes
- The built-in 3.7 V lithium-ion battery is rechargeable and non-replaceable. Do not attempt to remove or replace it — if damaged, stop use and contact support.
- Use only the recommended charger: DC 5 V / 1 A USB source.
- Inspect the charger’s cable and plug regularly. Stop use if damaged.
- Do not clean the camera with liquids. Wipe with a dry, soft cloth only.
- Contains small parts — not suitable for children under 3 years.
- Do not dispose of with household waste — please recycle responsibly.
Troubleshooting
- Camera won’t turn on — charge for at least 30 minutes via the Type-C cable, then hold Power for 3–5 seconds. Try a different cable or power source if it still doesn’t respond.
- “Card error” or card not recognised — the M3 uses TF cards up to 32 GB. Format the card in the camera’s settings menu (or on a computer as FAT32 / exFAT).
- Photos are blurry — hold the camera steady and ensure minimum focus distance of 10 cm.
- Battery drains quickly — heavy fill-light use, long video recording and frequent screen review all shorten runtime. Enable Auto Power Off (3 min or 5 min).
- Files don’t appear on the computer — confirm the camera is powered on while connected via Type-C. Try a different USB port or cable.
- Filter / settings not responding — power off, remove the card, power back on. If the issue persists, use Restore Factory in the settings menu.
Frequently asked questions
Quick answers to the most common questions about the CHUZHAO M3.