Welcome to the support page for your Air Pump – W8603. Here you will find everything you need to set up, use, and maintain your aquarium for a smooth and enjoyable experience.
📦 What’s in the Box
- Air Pump x 1
- Air Tubing x 1
- Check Valve x 1
- Air Stone x 1
- Dedicated Power Cable x 1
⚡ Quick Start Guide
- Connect Tubing: Connect one end of the air tubing to the pump’s air outlet.
- Install Check Valve (Important): Cut the tubing in the middle and install the Check Valve.
- Direction Check: Ensure the valve is installed so air flows towards the air stone (as shown in the diagram), while water backflow is blocked.
- Connect Air Stone: Attach the other end of the tubing to the air stone.
- Place & Power On: Submerge the air stone in the tank water. Place the air pump on a stable, dry surface outside the tank. Connect the dedicated power cable to a USB power source to start.
Safety & Maintenance
- Prevent Backflow: It is highly recommended to place the air pump above the water level. If the pump must be placed below the water level, you MUST install the check valve to prevent water from siphoning back into the pump and damaging the motor during a power outage.
- Do Not Submerge: This product is NOT submersible. Never place the pump body into water.
- Regular Cleaning: Air stones can get clogged with algae or dirt over time, reducing airflow. It is recommended to clean or replace the air stone regularly.